Hw to Change/Remove the Romeo 1.0 Lens

Remove the screw out from the frame by using a T6 screw driver

As picture below, the frame will open by nose part and lens part.

Now, you can  remove the lens easily.

How to Install a new Romeo 1.0 Lens.

First, please check the direction mark on the lens on where to install the lens carefully.

Our lenses have a marking line on the edge (see below picture).

The "marking line" should be at the upper nose side.

After placing the lens in the frame, put the rubber gasket and start screwing.

The process is not so difficult, but until the screw get stable inside, the frame and lens are unstable,

so you should do it slowly and carefully and hold the frame by hand until screw goes into the frame.